SLIP TIP 2.5MM CABLE KIT

Product Description

DIY Pre-Cut 2.5m Stainless Steel Cable Replacement Kit

This DIY pre-cut 2.5MM stainless steel cable kit is supplied with two crimps and is designed as a replacement cable for the Mannysub Universal Slip Tip.

Installation Instructions

1. Feed the stainless steel cable underneath the pin of the slip tip.
2. Pass the cable back through the large crimp, ensuring the cable strands do not protrude beyond the end of the crimp.
3. Pull the loop tight and securely crimp it using suitable crimping pliers.
4. At the opposite end, feed the cable through the smaller crimp and then back through the crimp to form a loop.
5. Pull the loop as tight as possible and securely crimp it in place.

Once installed, the cable is ready for use.