ROLLER KIT ASSEMBLY

Product Description

This roller kit front includes the components required to turn your wooden speargun into a roller speargun. The  components for this kit are made from the best quality materials available: carbon fibre, 316 stainless and acetal.

The width of the front of barrel for this installation should be at least 52mm wide to allow for the rollers to be fully recessed inside the slots.

The kit includes:

2 acetal Rollers. Each roller comes with a lightweight, low friction acetal bearings with 6 glass balls for maximum power transfer.
2 CNC cut  carbon fibre side brackets (84mm long x 10mm wide)  with 10mm / M4 threaded 316 stainless  screws to secure the rollers on each side of the wooden barrel.

Thanks to the roller design, 100% of the barrel length is used to propel the spear shaft combined with the pre tensioned rubbers and a greater rubber stretch to spear shaft weight ratio, a lot of extra power is generated.

Expect to see in excess of double the power, extra range, penetration, along with no recoil, better maneuverability and consistent accuracy and very smooth firing.

Lack of penetration and limited shooting range will be a thing of the past.

This kit is suitable for rubbers ranging from 14 to 19mm.

Additional information