PRE MADE SMALL ID REACTIVE BLACK RUBBERS
$65.00 – $71.00
These new small ID reactive rubbers is an excellent rubber forĀ roller or conventionalĀ spearguns, available in 14mm & 16mm
Product Description
These new small ID reactive rubbers is an excellent rubber forĀ roller or conventionalĀ spearguns, available in 14mm & 16mm
These new small ID rubbers provide anĀ impressiveĀ amount of power for their given size, allowing for greater shaft speed and momentum.
Thanks to the small ID (internal diameter)Ā hole of only 1mm, thisĀ leaves a larger inner diameter of rubber. This meansĀ more rubber working for the given diameter resulting in more power from a smaller diameter rubber and slightly less recoil for the power produced.
The new mannysub small Id reactive rubbers are very snappy, yet still elastic and smooth, capable of been stretched to 400% without collapsing.
These small ID rubbers are made from 100% latex available in 14 – 16 OD/ 1.5 MM ID hole, black in colour all the way through.
Each pre made rubber is meticulously put together with each dyneema insert hand made and measured prior to assembly. These pre made rubbers not only look nicely finished butĀ are also guaranteed forĀ the low profile dyneema inserts not to pull apart under highĀ stretch ratios.
Complete with loop loader, these rubbers are preĀ made for any size Manny sub roller spear gun or any spear guns fitted withĀ aĀ rollerĀ muzzle.
Simply choose the diameterĀ and length from the options above.
Adjustable pre tension: The rubbers are cut the same length as supplied standard on all Mannysub guns and connected via a dyneema loop. The dyneema loop can be left long (less pre tension) to make it easier to load but less power or can be shorten to increase the pre tension to generate more power (harder to load)
Full pre tension:Ā Choose this option if you like to pre tension the rubbers all the way and connect them directly to the two anchor points/lugs on the handle. These rubbers are cut slightly longer and have larger loops on the ends so they can slide directly over the anchor points/lugs.Ā Depending on the individual strength and loading technique these can be loaded by hand or with a loader assist.