PRE MADE PROGRESSIVE BLACK ROLLER RUBBERS

Product Description

This blend of  rubber provides the best balance of power, ease of loading, smoothness and accuracy of the spear shaft.

Each pre made rubber is meticulously put together with each dyneema insert hand made and measured prior to assembly. These pre made rubbers not only look nicely finished but are also guaranteed for the low profile dyneema inserts not to pull apart under high stretch ratios.

Complete with loop loader, these rubbers are pre made for any size Manny sub roller spear gun or spear guns fitted with a  roller muzzle

Simply choose the diameter and length from the options above.

Made from 100% pure latex this rubber features a small 2mm bore hole, leaving a greater wall diameter for more power for the same size rubber

These 100 % latex rubbers are available in 14 mm and 16mm.

Adjustable pre tension: The rubbers are cut the same length as supplied standard on all Mannysub guns and connected via a dyneema loop. The dyneema loop can be left long (less pre tension) to make it easier to load but less power or can be shorten to increase the pre tension to generate more power (harder to load)

Full pre tension: Choose this option if you like to pre tension the rubbers all the way  and connect them directly to the two anchor points/lugs on the handle. These rubbers are cut slightly longer and have larger loops on the ends so they can slide directly over the anchor points/lugs. Depending on the individual strength and loading technique these can be  loaded by hand or with a loader assist.

Additional information